Basic menu page 7
Item | Settings |
|
|
MARK/CUE | MARK (normal value), CUE |
Selects Mark mode | See “ClipLink Shooting” (page 77). |
or Cue mode |
|
CHG REEL NO. | See “To set the cassette name/ |
Sets the cassette | number” below. |
name/number |
|
|
|
To set the cassette name/number
Note
When using a cassette without cassette memory, you cannot set the cassette name or number.
1 Load a cassette.
2 Press the MENU switch to move the cursor to CHG REEL NO., then press the MENU dial.
The cursor (→ ) changes to the text entry arrow (↓ ) and the current cassette name/number is displayed. (“NO TAPE” is displayed if you neglected to load a cassette.)
3 Turn the MENU dial until the desired character appears, and press it.
The character cycles through the following sequence.
(Space)
4
5 Return to step 3 and repeat the text entry procedure.
6 After completing text entry, move the text entry cursor to the parenthesis position.
The display changes as follows.
7 Check your cassette name/number setting, and press the MENU dial if no more changes are required. (To make changes or to abort the procedure for this setting, return to step 2.)
This writes the new cassette name/number to the cassette memory, after which the display changes as follows.
Menus and Indications Screen Viewfinder 4 Chapter
Current cassette name/number
Chapter 4 Viewfinder Screen Indications and Menus 95