Basic menu page 5
This menu is displayed when CAM is selected on the basic menu page 4 and an external sync signal is input to the GEN LOCK IN connector.
Item | Settings |
SC PHASE | 000 to 999 |
Sub carrier phase adjustment for |
|
when the camcorder is genlocked.a) |
|
H PHASE | 000 to 135 (normal value) |
Horizontal phase adjustment for | to 199 |
when the camcorder is genlocked.a) |
|
a)This applies when using an external sync signal to synchronize operation of several camcorders (see page 50).
Note
This page is not displayed when a CCU (camera control unit) is connected.
Item | Settings |
|
|
MARKER | ON (normal value), OFF |
Sets marker display ON/OFF. | Markers are displayed |
| when this setting is ON |
| and is not displayed |
| when it is OFF. |
| When the setting is ON, |
| go to advanced menu |
| page 4 to select the type |
| of marker (see page |
| 102). |
|
|
DUR TIME | 00:00 to 59:59 (minute : |
Sets the recording time. | second) |
Setting the recording time before | See “Setting the |
shooting helps you with making | recording time in |
scenes of equal duration. | seconds”. |
When shooting with displaying |
|
the recording time of the current |
|
cut in the viewfinder (with the |
|
REC TIME switch set to DUR), |
|
the recording time indication |
|
flashes to remind you that the |
|
recording time has passed. |
|
|
|
Setting the recording time in seconds
Move the cursor to DUR TIME, then press the MENU dial.
A value of seconds appears.
Menus and Indications Screen Viewfinder 4 Chapter
Basic menu page 6
If you turn the MENU dial when “59” is displayed, the number under “MM” increased by one.
94 Chapter 4 Viewfinder Screen Indications and Menus