Sony DSR-400K/400PK, DSR-400L/400PL, DSR-450WSL/450WSPL To protect saved data, Notes on using and storing the “Memory, Saving USER menu data (user file) to the “Memory Stick”

Check that the access	Gently press in and release.
indicator is not lit.

2 Pull the “Memory Stick” towards you to withdraw it from the slot.

Note

Do not remove the “Memory Stick” while the access indicator is lit. You may lose data, or damage the “Memory Stick”.

To protect saved data

To prevent accidental erasure of important setup data, slide the LOCK switch on the “Memory Stick” right to the write protect position.

6Chapter	It is now impossible to write or delete data on the
	“MEMORY STICK LOCKED” appears and the data
	“Memory Stick”. If you try to do so, the message
and Saving	cannot be overwritten or deleted.
	Notes on using and storing the “Memory
Loading	• Avoid touching the connector of the “Memory Stick” or
	Stick”
the	contacting it with a metal object.
User	• When attaching a label to the “Memory Stick”, use only
Setting	the label supplied for the “Memory Stick”.
	• Do not drop, bend, or submit the “Memory Stick” to
Data	external shock.
	• Do not disassemble or modify the “Memory Stick”.
	• Avoid getting liquids on the “Memory Stick”.
	• Avoid using or storing the “Memory Stick” in a location
	subject to:
	-	extremely high temperature such as the hot inside of a
		car or the outdoors exposed to a burning sun, or a place
		near a heater.
	-	direct sunlight.
	• When storing and carrying the “Memory Stick”, keep it
	in its original case to ensure protection of important data.

• Do not format the “Memory Stick” using a PC. Format the “Memory Stick” on the MEMORY STICK page of the FILE menu.

110 Saving and Loading User Files

Saving USER menu data (user file) to the “Memory Stick”

You can save USER menu settings held in the camcorder as user files in the “Memory Stick”.

You can save up to 100 user files in the “Memory Stick”. Insert the “Memory Stick” into the “Memory Stick” slot, then proceed as follows.

1 Display the USER FILE page of the FILE menu.

For details on menu operations, see “Basic menu operations” on page 93.

?F01	USER	FILE		TOP
USER	FILE	LOAD	:	EXEC
USER	FILE	SAVE	:	EXEC
F.ID	: sssssssssssssssss
USER	PRESET		:	EXEC

To set a file ID for the data to be saved

Set the file ID before going to step 2. For details on setting the file ID, see “To set the file ID” on page 111.

2 Press the MENU knob. Then turn the MENU knob to move b to USER FILE SAVE, and press the MENU knob again.

The USER SAVE page appears.

?P00 USER SAVE			ESC
DISPLAY	MODE	:	ALL
001.NEW	FILE
002.NEW	FILE
003.NEW	FILE
004.NEW	FILE
005.NEW	FILE

Up to 20 pages, from P00 to P19, can be used to save user files in the “Memory Stick”. Each page can hold up to 5 files.

3 Turn the MENU knob until the page which contains the desired file number appears, and press the MENU knob.

P00 USER SAVE		ESC
DISPLAY MODE	:	ALL

001.NEW FILE 002.NEW FILE 003.NEW FILE 004.NEW FILE 005.NEW FILE

4 Turn the MENU knob to move b to the desired file number, and press the MENU knob.