Data Setting User the Loading and Saving 6 Chapter

according to the loaded scene file. If no file is present with a particular file number, this is shown as “NO FILE”.

To load scene files from a “Memory Stick” into the camcorder memory

You can load up to five scene files stored in the “Memory Stick” into the camcorder memory in a single operation.

1 Display the SCENE FILE page of the FILE menu.

For details on menu operations, see “Basic menu operations” on page 93.

2 Press the MENU knob. Then turn the MENU knob to move b to SCENE RECALL, and press the MENU knob again.

The SCENE RECALL page appears.

3 Turn the MENU knob until the SCENE RECALL page which contains the desired scene files appears.

4 Press the MENU knob. Then turn the MENU knob to move b to 5FILE LOAD B MEM 1-5, and press the MENU knob.

The message “RECALL OK? YES b NO” appears.

P01 SCENE RECALL

ESC

RECALL

OK?

YES

NO

DISPLAY

MODE

:

ALL

001.SCENE1

002.SCENE2 003.NO FILE 004.SCENE4 005.SCENE5

***.5FILE LOAD MEM1-5

5 To carry out the recall, turn the MENU knob to move

bYES and press the MENU knob.

To cancel, press the MENU knob leaving b pointing to NO.

When loading is complete, the message “COMPLETE” appears and the access indicator goes off.

Notes

•The scene files loaded from the “Memory Stick” overwrite data saved in the camcorder memory.

•To load the scene file saved in the camcorder memory when the “Memory Stick” is inserted, return to the P00 SCENE RECALL page and load the desired scene file in the camcorder memory.

•When there is no file to be loaded (shown as “NO FILE”), an existing file of the same number is unaffected. In the example shown in step 4, MEM(3) is not overwritten.

Resetting the settings of the camcorder to the standard settings

You can reset the settings of the camcorder to the settings saved in the reference file (standard settings).

For the items to be saved in the reference file, see page 74.

1 Display the SCENE FILE page of the FILE menu.

For details on menu operations, see “Basic menu operations” on page 93.

2 Press the MENU knob. Then turn the MENU knob to move b to STANDARD, and press the MENU knob again.

F04

SCENE FILE

TOP

s1

:SCENE

25

 

s2

:SCENE

26

 

s3

:SCENE

27

 

s4

:SCENE

28

 

s5

:NO FILE

 

 

xSTANDARD

 

 

SCENE

RECALL

:

EXEC

SCENE

STORE

:

EXEC

F.ID

:SCENE21

 

 

sdisplayed on the left of STANDARD changes to x. When x changes to s once again, the settings of the camcorder are reset to the settings saved in the reference file.

If you press the MENU knob again while x is displayed, the operation is cancelled and the camcorder returns to the settings before STANDARD was selected.

116 Saving and Loading Scene Files