Step 1 Installing the microphone
Install the supplied microphone. Be sure to connect the microphone plug to the INPUT1 connector.
(1) Attach the wind screen to the microphone.
(2) Loosen the microphone holder screw and open the cover.
(3) Place the microphone into the holder with the model name
(4) Connect the plug of the microphone to the INPUT 1 connector.
(5) Set the INPUT LEVEL selector to MIC or MIC ATT. When set to MIC ATT, you can reduce the volume by about 20 dB. And set the +48 V switch to ON.
(6) Select the channel to be used, using the REC CH SELECT switch. When you record a sound (signal), which comes from the microphone connected to the INPUT 1 connector, only on the channel 1, set it to CH1. When you record both on the channels 1 and 2, set it to CH1•CH2.
123
456
REC CH | INPUT | +48V | INPUT | +48V | REC CH | INPUT | +48V | INPUT | +48V |
SELECT LEVEL | LEVEL | SELECT LEVEL | LEVEL | ||||||
CH1•CH2 | LINE | ON | LINE | ON | CH1•CH2 | LINE | ON | LINE | ON |
MIC | OFF | MIC | OFF | MIC | OFF | MIC | OFF | ||
CH1 |
|
| CH1 |
|
| ||||
| MIC |
| MIC |
|
| MIC |
| MIC |
|
| ATT |
| ATT |
|
| ATT |
| ATT |
|
INPUT1 |
| INPUT2 | INPUT1 |
| INPUT2 |
When the wind is blowing hard
Set CH1 or CH2 of WIND to ON in the menu settings according to the input (p. 105).
When you unplug the microphone plug
Unplug it while holding the PUSH button down.
10