28
Adjusting setup items
1Press and hold the select button.
The setup display appears.
2Rotate the control dial until the desired
item appears, then press it.
3Rotate the control dial to select the
setting, then press it*.
The setting is complete.
4Press (BACK).
* For CLOCK-ADJ, BTM, BT INIT, BT SIGNL
and PAIRING settings, step 4 is not necessary.
The following items can be set depending
on the source and setting:
*1 When the unit is turned off.
*2 When FM is received.
CLOCK-ADJ (Clock Adjust) (page 7)
CT (Clock Time)
Activates the CT function: “ON,” “OFF”
(page 14).
BEEP
Activates the beep sound: “ON,” “OFF.”
CAUT ALM*1 (Caution Alarm)
Activates the caution alarm: “ON,”
“OFF” (page 8).
AUX-A*1 (AUX Audio)
Activates the AUX source display: “ON,”
“OFF” (page 29).
AUTO OFF
Shuts off automatically after a desired
time when the unit is turned off: “NO,”
“30S (Seconds),” “30M (Minutes),” “60M
(Minutes).”
DEMO
(Demonstration)
Activates the demonstration: “ON,”
“OFF.”
DIMMER
Changes the display brightness: “ON,”
“OFF.”
AUTO SCR (Auto Scroll)
Scrolls long items automatically: “ON,”
“OFF.”
REGIONAL*2
Restricts reception to a specific region:
“ON,” “OFF” (page 14).
REPEAT (page 16)
LOUDNESS
Reinforces bass and treble for clear
sound at low volume levels: “ON,”
“OFF.”
BTM (page 12)
BT INIT (Bluetooth Initialize)*1 (page 26)
BT SIGNL (Bluetooth Signal)
Turns the Bluetooth signal on/off.
PAIRING
Turns the pairing mode on/off.
Memorizes the information between this
unit and the Bluetooth device.