Sony DTC-ZE700 Playing Tracks Repeatedly (Repeat Play) Z, 14EN, Locating a Track (AMS*/Direct Access), Playing a track repeatedly, Playing all tracks repeatedly, Note, Note

Playback Operations

Locating a Track (AMS*/Direct Access)

You can locate the tracks in a number of ways, but only after you have recorded start IDs on the tape (see pages 15 to 18). To use Direct Access, program numbers must be recorded on the tape (see pages 15 and 18).

INPUT

REC MODE

SBM

REC LEVEL

L

R

•

5

•

MODE

OPEN/CLOSE

STANDARD

ON

4

6

•

§

ANALOG•

48 kHz•

• •

3

7

OPTICAL•

44.1 kHz•

•

•

COAXIAL•

LONG•

OFF

2

8

RESET

•

•

AMS

REC MUTE

1

9

±

0

)

•

­

R

0

10

PHONES

PHONE LEVEL

g

TIMER

START ID

MARGIN

REC OFF PLAY

AUTO RENUMBER REHEARSAL WRITE

ERASE RESET

p

·

P

r

POWER

REC

0

10

	­/ ± ·
To locate	Press
The beginning of the next	±as many times as you want
or succeeding tracks	while playing. For example, to
(AMS)	locate the second track ahead,
	press twice.
The beginning of the	­once while playing
current track(AMS)
The beginning of	­as many times as you want
preceding tracks (AMS)	while playing. For example, to
	locate the second track behind,
	press three times.
By specifying the	1 Enter the program number of
program number of a	the track with the number
track (Direct Access) Z	buttons.
	2 Press ((or ·on the deck).

* AMS = Automatic Music Sensor.zIf you enter the wrong program number during Direct Access Z

If you haven’t pressed the ((or ·on the deck) button, press CLEAR on the remote, then enter the correct number. If you have already pressed the ( (or ·on the deck) button, pressing the CLEAR button will not erase the wrong program number. Stop the deck and reenter the program number.

zIf the deck detects a blank section of 9 seconds or more, or the end of the tape

The deck rewinds the tape automatically to its beginning and stops (Auto Rewind).

zYou can make the deck start playing automatically from the beginning of the tape after rewinding

Press ·while holding down 0.

Playing Tracks Repeatedly (Repeat Play) Z

You can play a specific track or all the tracks on the tape repeatedly.

OPEN/

CLOSE

6

COUNTER

REPEAT MODE RESET

REPEAT

1 2 3

Playing all tracks repeatedly

Press REPEAT repeatedly while playing a track until “REPEAT” appears in the display. The deck will then play back all tracks until it detects the end of the last track, which may be:

—a blank section of 9 seconds or more—the end of the tape

When the deck detects either of the above, it rewinds the tape to beginning and plays back all tracks again. The deck repeats this cycle up to 5 times, then automatically stops.

To stop playing all tracks repeatedlyPress REPEAT repeatedly until “REPEAT” disappears.

Note

Repeat Play of all tracks is canceled when you take out the cassette.

Playing a track repeatedly

Press REPEAT repeatedly while playing the track that you want until “REPEAT 1” appears in the display. The deck will then play back the track until its end, which may be:

—the next start ID—a blank section of 9 seconds or more —the end of the tape

When the deck detects any of the above, it rewinds the tape and starts playing from the start ID of the same track again. The deck repeats this cycle up to 5 times, then automatically stops.

To stop playing a track repeatedlyPress REPEAT repeatedly until “REPEAT 1” disappears.

Note

Repeat Play of a single track is canceled when you take out the cassette.

14EN