39LDVT
OPTIONAL ACCESSORIES (Continued):
(Trim Kits continued from second page)
•Louver Kits - Additional Louver Kits ( To replace all louvers in desired color, 4 sets are required ) See Price List
•Filligree Louver Kits - See Price List
•Perimeter Trim Kits - See Price List
•Face Trim Kits - See Price List
Vent Opening for Combustible Wall
9³⁄₈"
(240 mm)
9³⁄₈"
(240 mm)
Fireplace Hearth | Framing Detail |
Opening for
Rnd.
7¹⁄₂" Dia.
(190 mm)
FLUE SYSTEM
7” Coaxial Direct Vent System
SPECIFICATIONS:
•7” O.D
•4” I.D
MINIMUM CLEARANCE TO COMBUSTIBLE MATERIAL
a)Rear Wall Vent Applications 2” top, 1” Sides & Bottom
b)Vertical Side Wall Applications 1” to All Sides
c)Vertical thru the Roof Applications 1” to All Sides
MINIMUM COMBUSTIBLE WALL/FLOOR OPENINGS
a)9 3/8” x 10 3/8” H for Rear Wall Vent Applications
b)9 3/8” W x 9 3/8” H for Vertical Side Wall/Vertical Ap- plications
MAXIMUM INSTALLATION LENGTHS
a)Rear Wall Vent Applications 20” (508mm) Vent Length
20” (508mm) Vent Length with one 45° elbow
b)Vertical Side Wall Applications
36” (914 mm) Horizontal Vent Length with 90° elbow installed directly on top of the unit
20ʼ (6 m) Horizontal Vent Length with
7.5ʼ (2.29 m) vertical rise
*Refer to manual for alternative venting distance
VERTICAL THRU THE ROOF APPLICATIONS 8ʼ (2.4 m) Minimum Vertical Rise
40ʼ (12 m) Maximum Vertical Rise
2 sets of 45° Elbows can be used in Vertical rise with 8ʼ maximum distance between elbows Two 90° elbows maximum for 10ʼ (3 m) Horizontal can be installed in Vertical Applications
*Maximum angular variation for Vertical Sidewall/Vertical Application in system is total of 270°
*Refer to installation manual for all venting restrictions with elbow use
TERMINATION CLEARANCES MINIMUM a) Horizontal
12” (305 mm) above Grade Level 18” (458 mm) to Ventilated Soffit 12” (305 mm) to Unventilated Soffit
12” (305 mm) under veranda, porch, deck or balcony
b) Vertical
24” (610 mm) Above a Roof Surface and any other obstruction within a horizontal distance
of 18” (458 mm)
*Refer to installation manual for more termination restrictions and clearance information
PRODUCT LISTING
ANSI Z21.88 - 2005/CSA 2.332005
Vented Gas Fireplace Heaters
This gas appliance should be installed by qualified installers in accordance with local building codes and the current National Fuel Gas code ANSI Z223.1 or CSA B 149.1 Installation code for Gas Burning Appliance and Equipment.
ESIG | |
D | N |
C | D |
ERTIFIE |
Rev. 09/06