5.1 Channel Surround Hookups
Started Getting
Some DVDs have a sound track with up to 5.1 channels recorded in Dolby Digital or DTS format. Using a receiver (amplifier) having 5.1 channel inputs and 6 speakers, you can enjoy a more realistic audio presence in the comfort of your own home.
“5.1 channel” stands for the 2 front speakers (Left and Right), 2 rear speakers (Left and Right), 1 center speaker, and a subwoofer.
Even if you have fewer than 6 speakers, the player appropriately distributes the output signal to the speakers.
This player also has a VIRTUAL 3D SURROUND mode. You can use 3D sound imaging to shift the sound of the rear speakers away from the actual speaker position (VIRTUAL REAR SHIFT) or to create 3 sets of virtual rear speakers from 1 set of actual rear speakers (VIRTUAL MULTI REAR, etc.). For details on the VIRTUAL 3D SURROUND mode, see page 47.
Speaker placement
For the best possible surround sound, we recommend the following conditions.
•Use higher performance speakers.
•Use rear and center speakers that match your front speakers in size and performance.
•Place the subwoofer between the front (L, R) speakers if possible.
Note
Do not place the rear speakers farther away from the listening position than the front speakers.
Do not connect the power cord to a switched AC outlet such as the AC outlet on a receiver (amplifier). Doing so may cause the Playback Memory, Bookmark, Disc Explorer and menu settings to be cancelled when you turn off the receiver.
Notes
•Do not connect the power cord to an AC outlet or press the POWER switch before completing all connections.
•Refer to the instructions supplied with the component to be connected.
•The cord connectors should be fully inserted into the jacks. A loose connection may cause hum and noise.
•If you want to connect the component via the DIGITAL OUT OPTICAL or COAXIAL connector using an optical or coaxial digital connecting cord (not supplied), see page 10.
Setups for the player
Some setup adjustments are necessary for the player depending on the components to be connected.
Use the setup display to change the various settings. For details on using the setup display, see page 63.
•To enjoy surround sounds by connecting the player to a receiver (amplifier) with 5.1 channel inputs
Correctly adjust each speaker to your listening position (page 75).
Required cords
Audio cords (not supplied) (2)
For the 5.1 CH OUTPUT FRONT and REAR jacks
White (L) | White (L) |
Red (R) | Red (R) |
|
Monaural audio cords (not supplied) (2)
For 5.1 CH OUTPUT CENTER and WOOFER jacks.
S video cord (supplied) (1)
For the S VIDEO OUTPUT jack
When connecting the cords, be sure to match the
12