Adjusting the speaker volume
1After you stop playback, select “SPEAKER SETUP” in the setup display.
2Select “TEST TONE” and set “TEST TONE” to “ON.”
You will hear the test tone from each speaker in sequence.
3From your listening position, select “BALANCE” or “LEVEL” and adjust the value of “BALANCE” using </, and “LEVEL” using M/m.
The test tone is emitted from both left and right speakers simultaneously.
4Select “TEST TONE” and set “TEST TONE” to “OFF” to turn off the test tone.
To adjust the volume of all the speakers at one time
Use the receiver’s (amplifier’s) volume control.
and Settings Adjustments
77