If you connect the player to a monitor or projector having component video input connectors that conform to output signals from the COMPONENT VIDEO OUT (Y, PB, PR) connectors on the player
Connect the component via the COMPONENT VIDEO OUT connectors using three video connecting cords (not supplied) of the same kind. You will get a better picture.
| Monitor or projector |
| with component video |
CD/DVD player | input connectors |
COMPONENT
VIDEO IN
COMPONENT
Setups for the player
Some setup adjustments are necessary for the player depending on the TV or other components to be connected.
Use the setup display to change the various settings. For details on using the setup display, see page 63.
• To connect the player to a normal TV |
In the setup display, set “TV TYPE” in “SCREEN |
SETUP” to “4:3 LETTER BOX” (default setting) or “4:3 |
PAN SCAN.” For details, see page 67. |
• To connect the player to a TV having the WIDE |
MODE function |
In the setup display, set “TV TYPE” in “SCREEN |
Started Getting
VIDEO OUT
Y
Y PB PRPB
PR
Notes
•Refer to the instructions supplied with the component to be connected.
•Do not connect this player to a video deck. If you do, noise may appear in the picture.
VCR |
| TV |
| |
|
|
|
| |
|
| Connect | ||
CD/DVD | ||||
| directly | |||
player |
| |||
|
|
| ||
•Depending on the TV or receiver (amplifier), sound distortion may occur because the audio output level is high. In this case, set “AUDIO ATT” in “AUDIO SETUP” to “ON” in the setup display. For details, see page 73.
zIf your TV has an
You can control the player from the TV.
Connect the TV via the
CD/DVD player | TV | |||
CONTROL S | ||||
|
| |||
CONTROL S |
|
| ||
IN |
|
| ||
|
|
|
| |
SETUP” to “16:9/4:3 WIDE MODE.” For details, see |
page 67. |
• To connect the player to a |
In the setup display, set “TV TYPE” in “SCREEN |
SETUP” to “16:9/4:3 WIDE MODE.” For details, see |
page 67. |
9