◆BALANCE

Varies the balance of the left and right speakers. Be sure to set “TEST TONE” to “ON” for easy adjustment.

The default adjustments are in parentheses.

FRONT Set this between –6 dB [L] and

(0 dB) +6 dB [R] (0.5 dB increments).

REAR Set this between –6 dB [L] and

(0 dB) +6 dB [R] (0.5 dB increments).

◆LEVEL

Varies the level of each speaker. Be sure to set “TEST TONE” to “ON” for easy adjustment.

The default adjustments are in parentheses.

FRONT (0 dB) Set this between –6 dB and 0 dB (0.5 dB increments).

CENTER

Set this between –12 dB and

(0 dB)

0 dB (0.5 dB increments).

 

 

REAR (0 dB)

Set this between –12 dB and

 

0 dB (0.5 dB increments).

 

SUBWOOFER Set this between –10 dB and

(0 dB)

+10 dB (0.5 dB increments).

To adjust the volume of all the speakers at one time

Use the amplifier’s (receiver’s) volume control.

◆TEST TONE

The speakers will emit a test tone. Use this when you use the 5.1CH OUTPUT jacks and adjust “BALANCE” and “LEVEL.”

OFF

The test tone is not emitted

 

from the speakers.

 

 

ON

The test tone is emitted from

 

each speaker in sequence.

 

 

Adjusting the speaker volume and level

1 Select “SPEAKER SETUP” in the Setup Display.

2 Select “TEST TONE” and set to “ON.”

You will hear the test tone from each speaker in sequence.

3 From your listening position, select “BALANCE” or “LEVEL” and adjust the value of “BALANCE” using C/c and “LEVEL” using X/x.

The test tone is emitted from both left and right speakers simultaneously.

4 Select “TEST TONE” and set to “OFF” to turn off the test tone.

Note

The test tone signals are not output from the digital jack.

94