Select a disc and play it (page 32, 33).

3 Select the disc by one of the following operations.

•press X/x

•Press DISC SKIP+/– to change the page, then press X/x.

4 Press ENTER.

The pop-up menu appears.

5 Press X/x to select “Play,” then press ENTER.

The Disc Explorer display disappears and playback starts.

To turn off the Disc Explorer

Press ORETURN.

.

Notes

•If you press FOLDER during playback, playback stops and the Disc Explorer appears. In this case, Resume Play is not available.

•If you load or try to play an empty slot, it appears as a blank in the Disc Explorer. You cannot select this slot.

•Even if the disc has a jacket picture recorded on it, the jacket picture may not appear on the Disc Explorer.

Capturing a scene for a jacket

picture *

You can capture your favorite scene in a disc to create a personal jacket picture. A personalized jacket picture will make spotting the disc in the Disc Explorer easier. This function is available only if the disc does not contain a pre-recorded jacket picture.

1

2 Slide the TV/DISC EXPLORER/DVD switch to DISC EXPLORER.

3 Press PICTURE MEMORY at your favorite scene.

The scene is captured as a still image, and is set as the jacket picture for the Disc Explorer. You can see the jacket picture in the detailed Disc Explorer display.

* JPEG only

.

Note

Depending on the DVD scene, you may not be able to capture the scene.

To erase a stored jacket picture

1Perform steps 1 and 2 in “Searching for a disc on the Disc Explorer” and select the disc you want to edit (page 44).

2After sliding the TV/DISC EXPLORER/ DVD switch to DISC EXPLORER, press

TOP MENU/EDIT.

“EDIT MODE” appears in the top right corner.

3Press X/x to select the jacket picture.

Highlight the

“EDIT MODE”

jacket picture

appears

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Disc4 : JACKET PICTURE

EDIT MODE

 

 

 

 

 

 

 

 

 

 

Super Car Chase

2004/January

ThrillerDVD-V

ENTER Back: RETURN

4Press CLEAR.

The stored jacket picture is deleted.

5Press TOP MENU/EDIT.

The confirmation display appears. If the contents are correct, select “Ok.” To return to the edit mode, select “Cancel.” If you select “Ok,” the jacket picture is cleared.

To cancel the edit mode

Press ORETURN. The confirmation display appears. If the contents are correct, select “Ok.” The edit mode ends and the detailed Disc Explorer display appears again. To return to the Disc Explorer display, press ORETURN. To turn off the Disc Explorer display, press ORETURN again.

Explorer) (Disc Discs Managing and for Searching

45