◆DISTANCE

Sets the distance from your listening position to the speakers.

Set the distance to your front speakers in “FRONT” first (A). Then adjust the values in “CENTER” (center speaker B), “REAR” (rear speaker C), and “SUBWOOFER” (D) to reflect the actual distance to your center speaker, rear speakers, and subwoofer.

B

D

A

A

(1~30 ft)

(1~30 ft)

C C

Be sure to change the value in the Setup Display each time you move the speakers. Start from the front speaker. The default adjustments are in parentheses.

FRONT

Set this between 1 and 30

(10 ft)

feet in 1 foot increments.

 

 

CENTER (10 ft)

Set this within –5 feet of the

 

“FRONT” setting in 1 foot

 

increments. For example, if

 

“FRONT” is set to 20 feet,

 

“CENTER” can be set

 

between 15 and 20 feet.

 

 

REAR (10 ft)

Set this within –15 feet of

 

the “FRONT” setting in 1

 

foot increments. For

 

example, if “FRONT” is set

 

to 20 feet, “REAR” can be

 

set between 5 and 20 feet.

 

 

Notes

•If each of the front or rear speakers are not placed at an equal distance from your listening position, set the distance according to the closest speaker.

•The minimum distance is 1 foot.

◆LEVEL (FRONT)

Varies the level of the front speakers. Be sure to set “TEST TONE” to “ON” for easy adjustment.

The default adjustments are in parentheses.

L (0 dB)

Set this between –6 dB and 0

 

dB in 0.5 dB increments.

R (0 dB)

Set this between –6 dB and 0

 

dB in 0.5 dB increments.

CENTER

Set this between –12 dB and

(0 dB)

0 dB in 0.5 dB increments.

SUBWOOFER

Set this between –10 dB and

(0 dB)

0 dB in 0.5 dB increments.

◆LEVEL (REAR)

Varies the level of the rear speakers. Be sure to set “TEST TONE” to “ON” for easy adjustment.

The default adjustments are in parentheses.

L (0 dB)

Set this between –12 dB and

 

0 dB in 0.5 dB increments.

R (0 dB)

Set this between –12 dB and

 

0 dB in 0.5 dB increments.

To adjust the volume of all the speakers at one time

Use the amplifier’s (receiver’s) volume control.

◆TEST TONE

The speakers will emit a test tone. Use this when you use the 5.1CH OUTPUT jacks and adjust “LEVEL.”

OFF

The test tone is not emitted

 

from the speakers.

ON

The test tone is emitted from

 

each speaker in sequence.

84