Sony DVP-CX995V Settings for the Speakers, (SPEAKER SETUP)

Settings for the Speakers

(SPEAKER SETUP)

To obtain the best possible surround sound, set the size of the speakers you have connected and their distance from your listening position. Then use the test tone to adjust the volume and balance of the speakers to the same level.

This setting is effective when connecting a speaker with 5.1 CH OUTPUT jacks (page 24).

Select “SPEAKER SETUP” in the Setup Display. To use the display, see “Using the Setup Display” (page 76).

The default settings are underlined.

SPEAKER SETUP

SIZE:

DISTANCE:
LEVEL(FRONT):
LEVEL(REAR):		OFF
TEST TONE:
	FRONT:		LARGE
	CENTER:		LARGE
	REAR:		LARGE
	SUBWOOFER:			YES

To return to the default setting

Select the item, then press CLEAR. Note that only the “SIZE” setting does not return to the default setting.

◆SIZE

Selects the size of the speakers.

• FRONT

LARGE	Normally select this position.
SMALL	Select this when the speaker
	cannot reproduce adequate bass
	frequencies.
• CENTER
LARGE	Normally select this position.
SMALL	Select this when the speaker
	cannot reproduce adequate bass
	frequencies.
NONE	Select this if you do not connect
	a center speaker.

• REAR

LARGE	Normally select this position.
	Select according to the rear
	speakers position.
SMALL	Select this when the sound
	distorts or the surround effects
	are difficult to hear.
	Select according to the rear
	speaker position.
NONE	Select this if you do not connect
	rear speakers.
• SUBWOOFER
YES	Select this if you connect a
	subwoofer to output the LFE
	(low frequency effect) signals
	from the subwoofer.
NONE	Select this if you do not connect
	a subwoofer.

Notes

•If your speakers are too small to reproduce low bass frequencies, utilize a subwoofer for low frequency sound. When you set the speaker settings to “SMALL,” the bass redirection circuitry will be activated and the bass frequencies for the speakers are output from the subwoofer.

•Even if there are fewer than 6 speakers connected, the player distributes the audio signal components to the front speakers.

•When you set the front speaker setting to “SMALL,” you cannot set the center and rear speaker settings to “LARGE,” and the subwoofer setting to “NONE.”

Adjustments and Settings

c continued 83