Sony DVP-F250 26

6 Press ENTER.

The Setup Display for selecting the aspect ratio of the TV to be connected appears.

Example: Asian/Oceanian models

7 Press X/x to select the setting that matches your TV type.

◆If you have a wide-screen TV or a 4:3 standard TV with a wide-screen mode

◆If you have a 4:3 standard TV

•4:3 LETTER BOX or 4:3 PAN SCAN (page 64)

8 Press ENTER.

The Setup Display for selecting the type of jack used to connect your amplifier (receiver) appears.

Is this player connected to an amplifier (receiver) ? Select the type of jack you are using.

YES

LINE OUTPUT L/R (AUDIO)

DIGITAL OUTPUT

9 Press X/x to select the type of jack (if any) you are using to connect to an amplifier (receiver), then press

ENTER.

Choose the item that matches the audio connection you selected on pages 20 to 23 ( A through D ).

•If you connect just a TV and nothing else, select “NO.” Quick Setup is finished and connections are complete.

B-1 C-1

•Select “LINE OUTPUT L/R (AUDIO).” Quick Setup is finished and connections are complete.

B-2 C-2 D

•Select “DIGITAL OUTPUT.” The Setup Display for “DOLBY DIGITAL” appears.

10Press X/x to select the type of

Dolby Digital signal you wish to send to your amplifier (receiver).

Choose the signal that matches the audio connection you selected on pages 21 to

B-2 C-2

• D-PCM (page 67)

•DOLBY DIGITAL (only if the amplifier (receiver) has a Dolby Digital decoder) (page 67)

11Press ENTER.