12Press X/x to select whether or not you wish to send a DTS signal to your amplifier (receiver).

Choose the item that matches the audio connection you selected on pages 21 to 23 ( B through D ).

B-2 C-2

• OFF (page 67)

D

•ON (only if the amplifier (receiver) has a DTS decoder) (page 67)

13Press ENTER.

Quick Setup is finished. All connections and setup operations are complete.

If your AV amplifier (receiver) has an MPEG audio decoder, set “MPEG” to “MPEG” (page 67).

Enjoying the surround sound effects

To enjoy the surround sound effects of this player or your amplifier (receiver), set the following items as described below for the audio connection you selected on pages 21 to 23 ( B through D ). Each of these is the default setting and does not need to be adjusted when you first connect the player. See page 62 for using the Setup Display.

Audio Connection (pages 20 to 23)

A

• No additional settings are needed.

B-1 C-1

•Set “DOWNMIX” to “DOLBY SURROUND” (page 67)

•If the sound distorts even when the volume is turned down, set “AUDIO ATT” to “ON” (page 66)

B-2 C-2 D

•Set “DOWNMIX” to “DOLBY SURROUND” (page 67)

•Set “DIGITAL OUT” to “ON” (page 67)

Hookups

27