Sony DVP-FX820 operating instructions Settings for the Sound, Audio Setup

Note

Depending on the DVD, “4:3 Letter Box” may be selected automatically instead of “4:3 Pan Scan” or vice versa.

◆Angle Mark

Displays the angle mark when you can change the viewing angles during playback of DVDs recorded with multi-angles.

On	Display the angle mark.
Off	Hide the angle mark.

◆Screen Saver

The screen saver image appears when you leave the player in pause or stop mode for 15 minutes. The screen saver will help prevent your display device from becoming damaged (ghosting). Press H to turn off the screen saver.

On	Activates the screen saver
	function.
Off	Deactivates the screen saver
	function.

◆Default

Each function returns to its original factory settings. Note that all of your settings will be lost.

Settings for the Sound

(Audio Setup)

“Audio Setup” allows you to set the sound according to the playback and connection conditions.

Select “Audio Setup” in the Setup Display. To use the display, see “Using the Setup Display” (page 28).

The default settings are underlined.

Audio Setup

Audio DRC	TV Mode
Digital Output	Off

Select: ENTER Cancel: RETURN

◆Audio DRC (Dynamic Range Control) (DVD only)

Makes the sound clear when the volume is turned down when playing a DVD that conforms to “Audio DRC.”

This function affects the output from the following jacks:

– AUDIO jack

– OPTICAL OUT jack only when “Dolby Digital” is set to “Downmix PCM” (page 31).

Standard	Normally, select this position.
TV Mode	Makes low sounds clear even if
	you turn the volume down.
Wide Range	Gives you the feeling of being
	at a live performance.

◆Digital Output

Selects if audio signals are output via the OPTICAL OUT jack.

On	Normally select this position.
	When you select “On,” see
	“Setting the digital output signal”
	for further settings.
Off	The influence of the digital circuit
	upon the analog circuit is
	minimal.

30