Information Additional
Troubleshooting
Sound
There is no sound.
/Check that the player is connected securely.
/The audio connecting cord is damaged. Replace it with a new one.
/Make sure you connect the player to the audio input connectors on the receiver (amplifier). (page 10)
/Make sure you turn on the TV and the receiver (amplifier).
/Make sure you select the appropriate position on the receiver (amplifier) so that you can listen to the sound from the player.
/The player is in pause mode or in
/Fast forward (FF1)or FF2)) or fast reverse (FR10or FR20) is performed. Press ·to return to normal play mode.
/When you play the Dolby Digital/MPEG AUDIO sound tracks and attempt to output from the DIGITAL OUT connectors, set “DIGITAL OUT” to ”ON” in the setup display. Otherwise no sound will come out from the DIGITAL OUT connectors. (page 55)
/When you play the DTS sound tracks, no sound will come out from the LINE OUT connectors. (page 56)
Sound noise is heard.
/Clean the disc.
/When you play the DTS sound tracks on a CD, sound noise will come out from the LINE OUT connectors. (page 56)
Sound distortion occurs.
/In the setup display, set “AUDIO ATT” in ”AUDIO SETUP” to “ON.”
The sound loses stereo effect when you play a VIDEO CD or a CD.
/Set “AUDIO” to “STEREO” in the Control Menu display. (page 29)
/Make sure you connect the player appropriately. (page 8, 10, 12)
/The sound becomes monaural in karaoke mode.
The surround effect is difficult to hear when you are playing a Dolby Digital sound track.
/Depending on the DVD, the output signal may not be the entire 5.1 channel but monaural or stereo even if the sound track is recorded in Dolby Digital format.
The sound comes from the center speaker only.
/Depending on the disc, the sound may come from the center speaker only.
Vocal is not heard when you select the vocal in karaoke mode.
/Vocal is not recorded in the disc.
Operation
The remote does not function.
/Remove any obstacles between the remote and the player.
/Use the remote near the player.
/Point the remote at the remote sensor gon the player.
/Replace all the batteries in the remote with new ones if they are weak.
The disc does not play.
/There is no disc inside (“Insert disc” appears on the TV screen).
Insert a disc.
/Insert the disc correctly with the playback side facing down on the disc tray.
/Clean the disc.
/The player cannot play
/Check the region code of the DVD. (page 4)
/Moisture has condensed inside the player. Remove the disc and leave the player turned on for about half an hour. (page 6)
The player does not play from the beginning when playing a disc.
/Repeat Play, Shuffle Play or Program Play has been selected. Press CLEAR. (page 32 to 36)
/Resume Play has been selected.
Press pon the front panel or on the remote before you start playing. (page 18)
/A title menu or a DVD menu automatically appears on the TV screen when you play your DVD, or a setup display automatically appears on the TV screen when you play your VIDEO CD with PBC functions.
60