If you connect the player to a monitor or projector having component video input connectors that conform to output signals from the COMPONENT VIDEO OUT (Y, CB/B-Y, CR/R-Y) connectors on the player

Connect the component via the COMPONENT VIDEO OUT connectors using three video connecting cords (not supplied) of the same kind. You will get a better picture.

CD/DVD player

Monitor or projector

with component video

 

COMPONENT VIDEO OUT

input connectors

 

COMPONENT

Y CB/B-Y CR/R-Y

VIDEO IN

 

CR

 

CB

 

Y

Notes

•Refer to the instructions supplied with the component to be connected.

•Do not connect this player to a video deck. If you do, noise may appear in the picture.

VCR TV

CD/DVDConnect

playerdirectly

•Depending on the TV or receiver (amplifier), sound distortion may occur because the audio output level is high. In this case, set “AUDIO ATT” in “AUDIO SETUP” to “ON” in the setup display. For details, see page 65.

Setups for the player

Some setup adjustments are necessary for the player depending on the TV or other components to be connected.

Use the setup display to change the various settings. For details on using the setup display, see page 56.

•To connect the player to a wide-screen TV

In the setup display, set “TV TYPE” in “SCREEN SETUP” to “16:9” (default setting). For details, see page 60.

•To connect the player to a normal TV

In the setup display, set “TV TYPE” in “SCREEN SETUP” to “4:3 LETTER BOX” or “4:3 PAN SCAN.” For details, see page 60.

•If the color system of the TV is NTSC or DUAL

Since the color system of the player is set to NTSC, you can use the player as it is.

•If the color system of the TV is PAL

To change the color system of the player to PAL, hold ! down while pressing X on the player. The power indicator lights up in green and changes to red. Then release X.

zYou can check the color system of the player

Press ! on the player and then press @/1 on the remote. The power indicator lights up in green. When “NTSC” appears on the front panel display, the color system of the player is set to NTSC. When “NTSC” does not appear, the color system is set to PAL.

Started Getting

9