Step 2: Connecting the Audio Cords
Refer to the chart below to select the connection that best suits your system. Be sure to also read the instructions for the components you wish to connect.
Select a connectionSelect one of the following connections, | A through | D . |
|
|
|
| |
Components to be connected | Connection | Your setup | |
TV | A | Example |
• Surround effects: TVS DYNAMIC (page 48), TVS WIDE (page 48)
Stereo amplifier (receiver) and two speakers | B (page 22) Example |
• Surround effects: TVS STANDARD (page 48) or
MD deck/DAT deck
• Surround effects: none
AV amplifier (receiver) having a Dolby* | C (page 23) Example |
Surround (Pro Logic) decoder and 3 to 6 |
|
speakers |
|
• Surround effects: Dolby Surround (Pro Logic) |
|
|
AV amplifier (receiver) with a digital input jack | D (page 24) Example |
having a Dolby Digital, MPEG audio or DTS** |
|
decoder and 6 speakers |
|
• Surround effects: Dolby Digital (5.1ch) (page 66), |
|
DTS (5.1ch) (page 67), MPEG audio (5.1ch) |
|
|
*Manufactured under license from Dolby Laboratories. “Dolby,” “Pro Logic,” and the
**“DTS” and “DTS Digital Out” are trademarks of Digital Theater Systems, Inc.
20