Resuming Playback from the Point Where You Stopped the Disc (Resume

Play/Multi-disc Resume)

The player remembers the point where you stopped the disc.

Resuming playback for the current disc (Resume Play)

The player remembers the point where you stopped the disc even if the player enters standby mode by pressing [/1.

1 While playing a disc, press x to stop playback.

“RESUME” appears on the front panel display.

2 Press H.

The player starts playback from the point where you stopped the disc in Step 1.

zHint

To play from the beginning of the disc, press x twice, then press H.

Notes

• The point where you stopped playing is cleared when:

you change the play mode.

you do Program Play or Shuffle Play.

you change the settings on the Setup Display.

When playing a CD, the point where you stopped is cleared when the disc tray is opened or the power cord is disconnected.

When playing a DATA CD, the point where you stopped playing is cleared when the player enters standby mode, the disc tray is opened, or the power cord is disconnected.

This function may not work with some discs.

Storing the point where you stopped the disc (Multi-disc Resume)

The player stores the point where you stopped the disc and resumes playback from the same point the next time you insert the same disc. The player remembers the stopped point of the disc even after you play other discs in the disc tray.

Resume playback points for up to 6 different DVD/VIDEO discs remain in memory even if you disconnect the power cord. When you store a resume playback point for the 7th disc, the resume playback point for the first disc is deleted.

zHints

To play from the beginning of the disc, press x twice, then press H.

To turn off the Multi-disc Resume function, set “MULTI-DISC RESUME” in “CUSTOM SETUP” to “OFF” (page 65). Playback restarts at the resume point only for the current disc in the player.

Note

This function may not work with some discs.

32