7 Press X/x to select the setting that matches your TV type.
◆If you have a 4:3 standard TV
•4:3 LETTER BOX or 4:3 PAN SCAN (page 63)
◆If you have a
• 16:9 (page 63)
8 Press ENTER.
The Setup Display for selecting the type of jack used to connect your amplifier (receiver) appears.
Is this player connected to an amplifier (receiver) ? Select the type of jack you are using.
YES
LINE OUTPUT L/R (AUDIO)
DIGITAL OUTPUT
NO
9 Press X/x to select the type of jack (if any) you are using to connect to an amplifier (receiver), then press
ENTER.
Choose the item that matches the audio connection you selected on pages 21 to 24 ( A through D ).
A
•If you connect just a TV and nothing else, select “NO.” Quick Setup is finished and connections are complete.
•Select “LINE OUTPUT L/R (AUDIO).” Quick Setup is finished and connections are complete.
•Select “DIGITAL OUTPUT.” The Setup Display for “DOLBY DIGITAL” appears.
10Press X/x to select the type of
Dolby Digital signal you wish to send to your amplifier (receiver).
Choose the signal that matches the audio connection you selected on pages 22 to 24 ( B through D ).
AUDIO SETUP
AUDIO ATT: |
| OFF |
AUDIO DRC: |
| STANDARD |
DOWNMIX: | DOLBY SURROUND | |
DIGITAL OUT: |
| ON |
DOLBY DIGITAL: |
| |
DTS: |
| |
|
|
|
|
| DOLBY DIGITAL |
•
D
•DOLBY DIGITAL (only if the amplifier (receiver) has a Dolby Digital decoder) (page 66)
11Press ENTER.
“DTS” is selected.
| AUDIO SETUP |
|
| |
|
| AUDIO ATT: |
| OFF |
|
| AUDIO DRC: |
| STANDARD |
|
| DOWNMIX: | DOLBY SURROUND | |
|
| DIGITAL OUT: |
| ON |
|
| DOLBY DIGITAL: |
| |
|
| DTS: |
| OFF |
|
|
|
| OFF |
|
|
|
| ON |
|
|
|
|
|
12Press X/x to select whether or not you wish to send a DTS signal to your amplifier (receiver).
Choose the item that matches the audio connection you selected on pages 22 to 24 ( B through D ).
• OFF (page 67)
D
•ON (only if the amplifier (receiver) has a DTS decoder) (page 67)
13Press ENTER.
Quick Setup is finished. All connections and setup operations are complete.
For Asian/Oceanian models only:
If your AV amplifier (receiver) has an MPEG audio decoder, adjust “MPEG” setting (page 67).
26