DOLBY DIGITAL (DVDs only)

Selects the type of Dolby Digital signal.

D-PCM

Select this when the player is

 

connected to an audio

 

component without a built-in

 

Dolby Digital decoder. You can

 

select whether the signals

 

conform to Dolby Surround

 

(Pro Logic) or not by making

 

adjustments to the

 

“DOWNMIX” item in

 

“AUDIO SETUP” (page 59).

 

 

DOLBY

Select this when the player is

DIGITAL

connected to an audio

 

component with a built-in

 

Dolby Digital decoder.

 

 

Note

If the HDMI OUT jack is connected to equipment not compatible with DOLBY DIGITAL signals, the “D-PCM” signals will be automatically output even when you select “DOLBY DIGITAL.”

DTS

Select the type of DTS audio signals.

OFF

Select this when the player is

 

connected to an audio

 

component without a built-in

 

DTS decoder.

 

 

ON

Select this when the player is

 

connected to an audio

 

component with a built-in DTS

 

decoder.

 

 

Note

If the HDMI OUT jack is connected to equipment not compatible with DTS signals, the “OFF” signals will be automatically output even when you select “ON.”

48kHz/96kHz PCM (DVD VIDEO only)

Selects the sampling frequency of the audio signal.

48kHz/16bit The audio signals of DVD VIDEOs are always converted to 48kHz/16bit.

96kHz/24bit All types of signals including 96kHz/24bit are output in their original format. However, if the signal is encrypted for copyright protection purposes, the signal is only output as 48kHz/16bit.

Notes

The analog audio signals from the LINE OUT L/R (AUDIO) jacks are not affected by this setting and keep their original sampling frequency level.

If the HDMI OUT jack is connected to equipment not compatible with 96 kHz/24 bit signals,

48 kHz/16 bit PCM will be automatically output even when you select “96kHz/24bit.”

60US

Page 60
Image 60
Sony DVP-NC800H operating instructions 60US, Dolby Digital DVDs only, Dts, 48kHz/96kHz PCM DVD Video only