Sony DVP-NC800H Replacing discs while playing a disc Exchange, Locking the disc tray Child Lock

Replacing discs while playing a disc (EXCHANGE)

You can open the disc tray while playing a disc so that you can check which discs are to be played next and replace discs without interrupting playback of the current disc.

DISC SKIP

EXCHANGE

DISC SKIP

Note

Do not push the disc tray to close in step 5, as you may damage the player.

Locking the disc tray (Child Lock)

You can lock the disc tray to prevent children from opening it.

When the player is in standby mode, press

ORETURN, ENTER, and then [/1 on the remote.

The player turns on and “LOCKED” appears on the front panel display. The Z button on the player or the remote does not work while the Child Lock is set.

To unlock the disc tray

When the player is in standby mode, press

ORETURN, ENTER, and then [/1 again.

Note

Even if you select “RESET” under “SETUP” in the Control Menu (page 55), the disc tray remains locked.

1 Press EXCHANGE.

The disc tray opens and two disc compartments appear. Even if the player is playing a disc, it doesn’t stop playing.

2 Replace the discs in the compartments with new ones.

3 Press DISC SKIP.

The disc tray turns and another two disc compartments appear.

4 Replace the discs in the compartments with new ones.

5 Press EXCHANGE.

The disc tray closes.

zHint

While the disc tray is open,

–If the playback of the current disc end, the player stops playing. If the disc is played in One Disc Repeat Play mode (page 32), the current disc starts playing again.

–In Shuffle Play mode (page 31), titles/tracks/ chapters are reshuffled only on the current disc.

–In Program Play mode (page 30), the titles/tracks/ chapters only on the current disc are played.

26US

Resuming Playback From the

Point Where You Stopped the

Disc (Multi-disc Resume)

The player stores the point where you stopped the disc for up to 6 discs and resumes playback the next time you insert the same disc. If you store a resume playback point for the 7th disc, the resume playback point for the first disc is deleted.

1 While playing a disc, press x to stop playback.

“RESUME” appears on the front panel display.

2 Press H.

The player starts playback from the point where you stopped the disc in step 1.

zHint

To play from the beginning of the disc, press x twice, then press H.