7 Press X/x to select the setting that matches your TV type.

If you have a wide-screen TV or a 4:3 standard TV with a wide-screen mode

• 16:9 (page 54)

If you have a 4:3 standard TV

4:3 LETTER BOX or 4:3 PAN SCAN (page 54)

8 Press ENTER.

The Setup Display for selecting the type of video signal output from the LINE (RGB)-TV jack appears.

SCREEN SETUP

TV TYPE:

16:9

 

SCREEN SAVER:

 

ON

 

BACKGROUND:

JACKET PICTURE

 

LINE:

 

VIDEO

 

 

 

VIDEO

 

 

 

S VIDEO

 

 

 

RGB

 

9 Press X/x to select the type of signal you want to output from the LINE (RGB)-TV jack.

Video signals

• VIDEO (page 54)

S video signals

• S VIDEO (page 54)

RGB signals

• RGB (page 54)

10Press ENTER.

The Setup Display for selecting the type of jack used to connect your amplifier (receiver) appears.

Is this player connected to an amplifier (receiver) ?

YES

DIGITAL OUTPUT

NO

11Press X/x to select the type of jack (if any) you are using to connect to an amplifier (receiver), then press ENTER.

If you did not connect an AV amplifier (receiver), select “NO,” then go to step 15.

If you connected an AV amplifier (receiver) using a coaxial digital cord, select “YES: DIGITAL OUTPUT.”

12Press X/x to select the type of

Dolby Digital signal you wish to send to your amplifier (receiver).

If your AV amplifier (receiver) has a Dolby Digital decoder, select “DOLBY DIGITAL.” Otherwise, select “D-PCM.”

 

AUDIO SETUP

 

 

 

 

AUDIO DRC:

 

STANDARD

 

 

DOWNMIX:

DOLBY SURROUND

 

 

DIGITAL OUT:

 

ON

 

 

DOLBY DIGITAL:

 

D-PCM

 

 

MPEG:

 

D-PCM

 

 

DTS:

 

DOLBY DIGITAL

 

 

48kHz/96kHz PCM:

48kHz/16bit

 

 

 

 

 

 

 

13Press ENTER.

“DTS” is selected.

 

AUDIO SETUP

 

 

 

 

 

AUDIO DRC:

 

STANDARD

 

 

DOWNMIX:

DOLBY SURROUND

 

 

DIGITAL OUT:

 

 

ON

 

 

DOLBY DIGITAL:

 

D-PCM

 

 

MPEG:

 

 

PCM

 

 

DTS:

 

 

OFF

 

 

48kHz/96kHz PCM:

 

OFF

 

 

 

 

 

 

 

 

ON

 

 

 

 

 

 

14Press X/x to select whether or not you wish to send a DTS signal to your amplifier (receiver).

If your AV amplifier (receiver) has a DTS decoder, select “ON.” Otherwise, select “OFF.”

15Press ENTER.

Quick Setup is finished. All connections and setup operations are complete.

If your AV amplifier (receiver) has an MPEG audio decoder, set “MPEG” to “MPEG” (page 57).

18