To cancel the setting
Select “OFF” in step 2.
◆TVS DYNAMIC THEATER
Creates one set of LARGE virtual rear speakers and virtual subwoofer from the sound of the front speakers (L, R) without using actual rear speakers and subwoofer (shown below).
This mode is effective when the distance between the front L and R speakers is short, such as with
TV
Sub woofer
◆TVS DYNAMIC
Creates one set of virtual rear speakers from the sound of the front speakers (L, R) without using actual rear speakers (shown below).
This mode is effective when the distance between the front L and R speakers is short, such as with
TV
◆TVS WIDE
Creates five sets of virtual rear speakers from the sound of the front speakers (L, R) without using actual rear speakers (shown below).
This mode is effective when the distance between the front L and R speakers is short, such as with
TV
◆TVS NIGHT
Large sounds, such as explosions, are suppressed, but quieter sounds are unaffected. This feature is useful when you want to hear the dialogue and enjoy the surround sound effects of “TVS WIDE” at low volume.
◆TVS STANDARD
Creates three sets of virtual rear speakers from the sound of the front speakers (L, R) without using actual rear speakers (shown below). Use this setting when you want to use TVS with 2 separate speakers.
LR
L:Front speaker (left)
R:Front speaker (right) 
: Virtual speaker
Notes
•When the playing signal does not contain a signal for the rear speakers, you cannot hear the surround effects.
•When you select one of the TVS modes, turn off the surround setting of the connected TV or amplifier (receiver).
•Make sure that your listening position is between and at an equal distance from your speakers, and that the speakers are located in similar surroundings.
•Not all discs will respond to the “TVS NIGHT” function in the same way.
•The TVS effects do not work when using the Fast Play or Slow Play functions, even though you can change the TVS modes.
36