4 Press A on the player, and place a disc on the disc tray.
Playing Discs
Playing Discs 
Depending on the DVD or VIDEO CD, some operations may be different or restricted. Refer to the operating instructions supplied with your disc.
ENTER
RETURN 
Playback side facing down | Playing |
5 Press H. | Discs |
|
The disc tray closes. The player starts playback (continuous play) and the play indicator lights up. Adjust the volume on the TV or the amplifier (receiver). Depending on the disc, a menu may appear on the TV screen. For DVD VIDEOs, see page 22. For VIDEO CDs, see page 23.
To turn off the player
Press [/1. The player enters standby mode.
zHint
You can have the player turn off automatically whenever you leave it in stop mode for more than 30 minutes. To turn this function on or off, set “AUTO POWER OFF” in “CUSTOM SETUP” to “ON” or “OFF” (page 55).
1 Turn on your TV.
2 Press [/1.
The player turns on and the power indicator lights up.
3 Switch the input selector on your
TV so that the signal from the player appears on the TV screen.
◆When using an amplifier (receiver)
Turn on the amplifier (receiver) and select the appropriate channel so that you can hear sound from the player.
Notes
•The play indicator lights up each time the disc is in playback mode.
•Discs created on DVD recorders must be correctly finalized before they can be played. For more information about finalizing, refer to the operating instructions supplied with the DVD recorder.
Notes on playing DTS sound tracks on a
DVD VIDEO
•DTS audio signals are output only through the DIGITAL OUT (COAXIAL) jack.
•When you play a DVD VIDEO with DTS sound tracks, set “DTS” to “ON” in “AUDIO SETUP” (page 57).
•If you connect the player to audio equipment without a DTS decoder, do not set “DTS” to “ON” in “AUDIO SETUP” (page 57). A loud noise may come out from the speakers, affecting your ears or causing the speakers to be damaged.
,continued 19