B-2 C-2

• D-PCM (page 68)

D

•DOLBY DIGITAL (only if the amplifier (receiver) has a Dolby Digital decoder) (page 68)

15Press ENTER.

“DTS” is selected.

AUDIO SETUP

AUDIO ATT:

 

 

OFF

 

AUDIO DRC:

 

STANDARD

 

DOWNMIX:

DOLBY SURROUND

 

DIGITAL OUT:

 

 

ON

 

DOLBY DIGITAL:

 

D-PCM

 

MPEG:

 

 

PCM

 

DTS:

 

 

OFF

 

48kHz/96kHz PCM:

 

OFF

 

 

 

 

ON

 

16Press X/x to select whether or not you wish to send a DTS signal to your amplifier (receiver).

Choose the item that matches the audio connection you selected on pages 21 to 23 ( B through D ).

B-2 C-2

• OFF (page 68)

D

•ON (only if the amplifier (receiver) has a DTS decoder) (page 68)

17Press ENTER.

Quick Setup is finished. All connections and setup operations are complete.

If your AV amplifier (receiver) has an MPEG audio decoder, set “MPEG” to “MPEG” (page 68).

Enjoying the surround sound effects

To enjoy the surround sound effects of this player or your amplifier (receiver), set the following items as described below for the audio connection you selected on pages 21 to 23 ( B through D ). Each of these is the default setting and does not need to be adjusted when you first connect the player. Refer to page 62 for using the Setup Display.

Audio Connection (pages 21 to 23)

A

• No additional settings are needed.

B-1 C-1

•Set “DOWNMIX” to “DOLBY SURROUND” (page 67)

•If the sound distorts even when the volume is turned down, set “AUDIO ATT” to “ON” (page 67)

B-2 C-2 D

•Set “DOWNMIX” to “DOLBY SURROUND” (page 67)

•Set “DIGITAL OUT” to “ON” (page 67)

26