This connection will use your TV’s or audio component’s two speakers for sound.
BDigital audio input jackIf your audio component has a Dolby*1 Digital or DTS*2 decoder and a digital input jack, use this connection. You can enjoy Dolby Digital (5.1ch) and DTS (5.1ch) surround effect.
If you connect to a Sony audio component that is compatible with the CONTROL FOR HDMI function, refer to the operating instructions supplied with the audio component.
*1 Manufactured under license from Dolby Laboratories.
Dolby, Pro Logic, and the
*2 Manufactured under license under U.S. Patent #: 5,451,942 & other U.S. and worldwide patents issued & pending. DTS and DTS Digital Out are registered trademarks and the DTS logos and Symbol are trademarks of DTS, Inc. © 1996- 2007 DTS, Inc. All Rights Reserved.
Notes
•After you have completed the connection, be sure to set “DOLBY DIGITAL” to “DOLBY DIGITAL” and “DTS” to “ON” in Quick Setup (page 22).
•When you connect an audio component that conforms to the 96 kHz sampling frequency, set “48kHz/96kHz PCM” in “AUDIO SETUP” to “96kHz/24bit” (page 59).
•The TVS effects of this player cannot be used with this connection.
•When you connect the player to an audio component using an HDMI cord, you will need to do one of the following:
–Connect the audio component to the TV with the HDMI cord.
–Connect the player to the TV with a video cord other than HDMI cord (component video cord, S VIDEO cord, or audio/video cord).
•When connecting to the HDMI OUT jack, carefully align the HDMI connector with the jack. Do not bend and apply force to the HDMI cord.
Hookups