8 Press ENTER.
The Setup Display for selecting the type of jack used to connect your audio component such as an amplifier (receiver) appears.
Is this player connected to an amplifier (receiver)? Select the type of jack you are using.
YES
LINE OUTPUT L/R(AUDIO)
DIGITAL OUTPUT
NO
9 Press X/x to select the type of jack (if any) you are using to connect to an audio component, then press
ENTER.
If you did not connect an audio component, select “NO,” then go to step 13.
If you connected an audio component using just an audio cord, select “YES: LINE OUTPUT L/R (AUDIO),” then go to step 13.
If you connected an audio component using a digital coaxial or optical/HDMI cord, select “YES: DIGITAL OUTPUT.”
10Press X/x to select the type of
Dolby Digital signal you wish to send to your audio component.
If your audio component has a Dolby Digital decoder, select “DOLBY DIGITAL.” Otherwise, select
AUDIO SETUP
AUDIO DRC: |
| STANDARD |
DOWNMIX: | DOLBY SURROUND | |
DIGITAL OUT: |
| ON |
DOLBY DIGITAL: |
| |
DTS: |
| |
48kHz/96kHz PCM: DOLBY DIGITAL
11Press ENTER.
“DTS” is selected.
AUDIO SETUP
AUDIO DRC: |
| STANDARD | |
DOWNMIX: | DOLBY SURROUND | ||
DIGITAL OUT: |
|
| ON |
DOLBY DIGITAL: |
|
| |
DTS: |
|
| OFF |
48kHz/96kHz PCM: |
| OFF | |
|
|
| ON |
12Press X/x to select whether or not you wish to send a DTS signal to your audio component.
If your audio component has a DTS decoder, select “ON.” Otherwise, select “OFF.”
13Press ENTER.
Quick Setup is finished. All connections and setup operations are complete.
Note
When “PhotoTV HD” mode is activated (page 50), the selection for “TV TYPE” is skipped.
Hookups