◆YCBCR/RGB (HDMI)
Selects the type of HDMI signal output from HDMI OUT jack.
You cannot select this when “PhotoTV HD” mode is activated (page 50).
YCBCR Outputs YCBCR signals.
RGB | Outputs RGB signals. |
Notes
•If the playback picture becomes distorted, set this setting to “RGB.”
•If the HDMI OUT jack is connected to equipment with a DVI jack, “RGB” signals will be automatically output even when you select “YCBCR”.
◆AUDIO (HDMI)
Selects the type of audio signal output from the HDMI OUT jack.
AUTO | Normally, select this. Outputs |
| audio signals according to the |
| “DIGITAL OUT” settings |
| |
|
|
PCM | Converts Dolby Digital, or |
| 96 kHz/24 bit PCM signals to |
| 48 kHz/16 bit PCM. |
|
|
Note
A loud noise (or no sound) will be output if you connect the player to a TV that is not compatible with DOLBY DIGITAL/DTS signals and “AUTO” is selected. In this case, select “PCM.”
◆CONTROL FOR HDMI
Switches the CONTROL FOR HDMI setting on or off.
OFF | Switches this function off. |
|
|
ON | Allows you to use the |
| CONTROL FOR HDMI |
| features (page 17). |
|
|
Note
When you change this function from “OFF” to “ON” on a Sony TV that is compatible with the CONTROL FOR HDMI function, all compatible devices will change to “ON” automatically, or vice versa. For more details, refer to the operation instructions supplied with the TV.
◆LANGUAGE FOLLOW
Switches the languages of the DVD player to the same as the current TV OSD language.
You cannot select this when “CONTROL FOR HDMI ” is set to “OFF.”
ON | Switches this function on. |
|
|
OFF | Switches this function off. |
|
|
Notes
•Turn off any display before using this function.
•The OSD language for player keeps if the TV’s language cannot be supported.
Adjustments and Settings