◆DTS
Selects the type of DTS audio signals.
OFF | Select this when the player is |
| connected to an audio |
| component without a |
| DTS decoder. |
|
|
ON | Select this when the player is |
| connected to an audio |
| component with a |
| decoder. |
|
|
b
•When you play a DVD VIDEO with DTS sound tracks, set “DTS” to “ON” in “AUDIO SETUP” (page 35).
•If you connect the player to audio equipment without a DTS decoder, do not set “DTS” to “ON” in “AUDIO SETUP” (page 35). A loud noise may come out from the speakers, affecting your ears or causing the speakers to be damaged.
•If the HDMI OUT jack is connected to equipment not compatible with DTS signals, the “OFF” signals will be automatically output even when you select “ON.”
◆48kHz/96kHz PCM (DVD VIDEO only)
Selects the sampling frequency of the audio signal.
48kHz/16bit The audio signals of DVD VIDEOs are always converted to 48kHz/16bit.
96kHz/24bit All types of signals including 96kHz/24bit are output in their original format. However, if the signal is encrypted for copyright protection purposes, the signal is only output as 48kHz/16bit.
b
•The analog audio signals from the LINE OUT L/R (AUDIO) jacks are not affected by this setting and keep their original sampling frequency level.
•If the HDMI OUT jack is connected to equipment not compatible with 96 kHz/24 bit signals,
48 kHz/16 bit PCM will be automatically output even when you select “96kHz/24bit.”
HDMI SETUP
You can adjust items related to the HDMI connection.
◆HDMI RESOLUTION
Selects the type of video signals output from the HDMI OUT jack. When you select AUTO (1920⋅1080p) (default), the player outputs video signals of the highest resolution acceptable for your TV. If the picture is not clear, natural or to your satisfaction, try another option that suits the disc and your TV/projector, etc. For details, refer also to the instruction manual supplied with the TV/ projector, etc.
You cannot select this when “PhotoTV HD” mode is activated (page 28).
AUTO | Normally, select this. |
(1920⋅1080p) |
|
|
|
1920⋅1080i | Sends 1920⋅1080i video |
| signals. |
|
|
1280⋅720p | Sends 1280⋅720p video |
| signals. |
|
|
720⋅480p | Sends 720⋅480p video signals. |
|
|
To reset the setting
If the picture does not appear normal or goes blank, press [/1 to turn off the player, and enter “369” using the number buttons on the remote, then press [/1 to turn on the player again.
b
In case of “AUTO (1920⋅1080p),” the player automatically adjusts the video signals that are suitable for the TV.
Other cases, the player directly send the signal even if TV cannot accept.
◆JPEG RESOLUTION
Selects the type of JPEG resolution so that you can enjoy high picture quality via your HDMI connection.
You cannot select this when “HDMI RESOLUTION” is set to “720⋅480p” or “TV TYPE” is set to “4:3 LETTER BOX” or “4:3 PAN SCAN.”
PhotoTV HD Displays extra
Adjustments and Settings
,continued 35US