*1 Manufactured under license from Dolby Laboratories. “Dolby,” “Pro Logic,” and the double-D symbol are trademarks of Dolby Laboratories.

*2 Manufactured under license from Digital Theater Systems, Inc. U.S. Pat. No’s.

5,451,942; 5,956,674; 5,974,380; 5,978,762; 6,226,616; 6,487,535 and other U.S. and worldwide patents issued and pending. “DTS” and “DTS Digital Surround” are registered trademarks of Digital Theater Systems, Inc. Copyright 1996, 2003 Digital Theater Systems, Inc. All Rights Reserved.

zHints

•For connection B-2

For correct speaker location, refer to the operating instructions of the connected components.

•To enhance the sound performance:

–Use high-performance speakers.

–Use front, rear, and center speakers of the same size and performance.

–Place the subwoofer between the left and right

front speakers.

• Use connection B-2when connecting to 7 or more speakers (6.1 ch or more).

Notes

For connection B-2

•After you have completed the connection, be sure to set “DOLBY DIGITAL” to “DOLBY DIGITAL” and “DTS” to “DTS” in Quick Setup (page 25).

•When you connect an amplifier (receiver) that conforms to the 96 kHz sampling frequency, set “48kHz/96kHz PCM” in “AUDIO SETUP” to “96kHz/24bit” (page 75).

•Super Audio CD audio signals are not output from the DIGITAL OUT (COAXIAL or OPTICAL)/ HDMI OUT jack.

•The surround sound effects of this player cannot be used with this connection.

•When you connect the player to an AV amplifier (receiver) using an HDMI cord, you will need to

do one of the following:

–Connect the AV amplifier (receiver) to the TV with the HDMI cord.

–Connect the player to the TV with a video cord other than HDMI cord (component video cord, S VIDEO cord, or audio/video cord).

24