Notes

•When you set the item to “AUTO,” the language may change. The “TRACK SELECTION” setting has higher priority than the “AUDIO” settings in “LANGUAGE SETUP” (page 69).

•If you set “DTS” to “D-PCM” (page 75), the DTS sound track is not played even if you set “TRACK SELECTION” to “AUTO.”

•If PCM, DTS, and Dolby Digital sound tracks have the same number of channels, the player selects PCM, DTS, and Dolby Digital sound tracks in this order.

◆MULTI-DISC RESUME (DVD VIDEO/ VIDEO CD only)

Switches the Multi-disc Resume setting on or off. Resume playback can be stored in memory for up to 40 different DVD VIDEOs/ VIDEO CDs (page 30).

ON

Stores the resume setting in

 

memory for up to 40 discs.

 

 

OFF

Does not store the resume

 

setting in memory. Playback

 

restarts at the resume point only

 

for the current disc in the player.

 

 

Note

If you run Quick Setup, Multi-disc Resume settings stored in memory may return to the default settings.

◆AUDIO (HDMI)

Selects the type of audio signal output from the HDMI OUT jack.

AUTO

Normally, select this. Outputs

 

audio signals according to the

 

“DIGITAL OUT” settings

 

(page 74).

 

 

PCM

Converts Dolby Digital, DTS,

 

or 96 kHz/24 bit PCM signals to

 

48 kHz/16 bit PCM.

 

 

Note

A loud noise (or no sound) will be output if you connect the player to a TV that is not compatible with DOLBY DIGITAL/DTS signals and “AUTO” is selected. In this case, select “PCM.”

Settings for the Sound

(AUDIO SETUP)

“AUDIO SETUP” allows you to set the sound according to the playback and connection conditions.

Select “AUDIO SETUP” in the Setup Display. To use the display, see “Using the Setup Display” (page 68).

The default settings are underlined.

AUDIO SETUP

AUDIO ATT:

 

OFF

AUDIO DRC:

 

STANDARD

AUDIO FILTER:

 

SHARP

DOWNMIX:

DOLBY SURROUND

DIGITAL OUT:

 

ON

DOLBY DIGITAL:

 

D-PCM

DTS:

 

D-PCM

48kHz/96kHz PCM:

48kHz/16bit

◆AUDIO ATT (attenuation)

If the playback sound is distorted, set this item to “ON.” The player reduces the audio output level.

This function affects the output of the following jacks:

–LINE OUT L/R (AUDIO) jacks

–5.1CH OUTPUT jacks

OFF Normally, select this position.

ON Select this when the playback sound from the speakers is distorted.

◆AUDIO DRC (Dynamic Range Control) (DVD VIDEO/DVD-VR mode only)

Makes the sound clear when the volume is turned down when playing a DVD that conforms to “AUDIO DRC.”

This function affects the output from the following jacks:

– LINE OUT L/R (AUDIO) jacks

– 5.1CH OUTPUT jacks

– DIGITAL OUT (OPTICAL or COAXIAL)/ HDMI OUT jack only when “DOLBY DIGITAL” is set to “D-PCM” (page 74).

STANDARD Normally select this position.

TV MODE

Makes low sounds clear even if

 

you turn the volume down.

 

 

WIDE

Gives you the feeling of being

RANGE

at a live performance.

Adjustments and Settings

,continued 73