6 Press ENTER.
The Setup Display for selecting the aspect ratio of the TV to be connected appears.
| SCREEN SETUP |
|
| |
|
| TV TYPE: |
| 16:9 |
|
| HDMI RESOLUTION: |
| 16:9 |
|
| YCBCR/RGB (HDMI): | 4:3 LETTER BOX | |
|
| SCREEN SAVER: | 4:3 PAN SCAN | |
|
| BACKGROUND: | JACKET PICTURE | |
|
| BLACK LEVEL: |
| ON |
|
| BLACK LEVEL (COMPONENT | OUT): | OFF |
|
| 4:3 OUTPUT: |
| FULL |
|
|
|
|
|
|
|
|
|
|
7 Press X/x to select the setting that matches your TV type.
◆If you have a 4:3 standard TV
•4:3 LETTER BOX or 4:3 PAN SCAN (page 70)
◆If you have a
• 16:9 (page 70)
8 Press ENTER.
The Setup Display for selecting the type of jack used to connect your amplifier (receiver) appears.
Is this player connected to an amplifier (receiver)? Select the type of jack you are using.
YES
LINE OUTPUT L/R(AUDIO)
DIGITAL OUTPUT
DIGITAL & 5.1CH OUTPUT
NO
9 Press X/x to select the type of jack (if any) you are using to connect to an amplifier (receiver), then press
ENTER.
If you did not connect an AV amplifier (receiver), select “NO,” then go to step 19.
If you connected an AV amplifier (receiver) using just an audio cord, select “YES: LINE OUTPUT L/R (AUDIO),” then go to step 19.
If you connected an AV amplifier (receiver) using a digital coaxial or optical/HDMI cord, select “YES:
DIGITAL OUTPUT.”
Setup Display for “DOLBY DIGITAL” appears.
If you connected an AV amplifier (receiver) using an audio cord, select “YES: DIGITAL & 5.1CH OUTPUT.” The Setup Display for “DOLBY DIGITAL” appears.
10Press X/x to select the type of
Dolby Digital signal you wish to send to your amplifier (receiver).
If your AV amplifier (receiver) has a Dolby Digital decoder, select “DOLBY DIGITAL.” Otherwise, select
AUDIO SETUP
AUDIO ATT: |
| OFF |
AUDIO DRC: |
| STANDARD |
AUDIO FILTER: |
| SHARP |
DOWNMIX: | DOLBY SURROUND | |
DIGITAL OUT: |
| ON |
DOLBY DIGITAL: |
| |
DTS: |
| |
48kHz/96kHz PCM: DOLBY DIGITAL
11Press ENTER.
“DTS” is selected.
AUDIO SETUP
AUDIO ATT: |
|
| OFF |
|
AUDIO DRC: |
| STANDARD |
| |
AUDIO FILTER: |
|
| SHARP |
|
DOWNMIX: | DOLBY SURROUND |
| ||
DIGITAL OUT: |
|
| ON |
|
DOLBY DIGITAL: |
|
|
| |
DTS: |
|
|
| |
48kHz/96kHz PCM: |
|
| ||
|
|
| DTS |
|
12Press X/x to select whether or not you wish to send a DTS signal to your amplifier (receiver).
If your AV amplifier (receiver) has a DTS decoder, select “DTS.” Otherwise, select
13Press ENTER.
◆When “DIGITAL OUTPUT” is selected in step 9
• Quick Setup is finished and connections are complete.
◆When “DIGITAL & 5.1CH OUTPUT” is selected in step 9
• The Setup Display for “SPEAKER SETUP” appears.
26