Sony DVP-S570D 66

Controlling Your TV or AV Receiver (Amplifier) with the Supplied Remote

Adjustments and Settings

Controlling the TV

You can control your TV using the buttons below. When you set the TV/DVD switch to TV, you can also control the number, 1/uand ENTER buttons.

ENTER

By pressing	You can
?/1	Turn the TV on or off

TV/VIDEO	Switch the TV’s input source between
	the TV and other input sources

VOL	Adjust the volume of the TV

CH	Select the channel of the TV

Number buttons	Select the channel of the TV
and ENTER

Note

Depending on the TV, you may not be able to control your TV or to use some of the buttons above.

Controlling AV receivers (amplifiers) with

the remote

TV/DVD

1Slide the TV/DVD switch to DVD.

2Hold down ?/1, and enter your AV receiver’s manufacturer’s code (see the table) using the number buttons. Then release ?/1.

Code numbers of controllable AV receivers (amplifier)

If more than one code number is listed, try entering them one at a time until you find the one that works with your AV receiver (amplifier).

Notes

•If you enter a new code number, the code number previously entered will be erased.

•When you replace the batteries of the remote, the code number may be reset to the default setting. Reset the appropriate code number.

Controlling the AV receiver (amplifier)

You can change the volume of the AV receiver (amplifier) using AV VOL.

1 2 3

4 5 6

7 8 9

AV VOL

Notes

•Depending on the AV receiver (amplifier), you may not be able to control your AV receiver (amplifier).

•You can control the AV receiver (amplifier) regardless of the position of the TV/DVD switch.