8 Press ENTER.
The Setup Display for selecting the type of video signal output from the LINE
SCREEN SETUP
TV TYPE: | 16:9 |
| |
SCREEN SAVER: |
| ON |
|
BACKGROUND: | JACKET PICTURE |
| |
LINE: |
| VIDEO |
|
|
| VIDEO |
|
|
| RGB |
|
9 Press X/x to select the type of signal you want to output from the LINE
◆Video signals
• VIDEO (page 29)
◆RGB signals
• RGB (page 29)
10Press ENTER.
The Setup Display for selecting the type of jack used to connect your audio component such as an amplifier (receiver) appears.
Is this player connected to an amplifier (receiver) ?
YES
DIGITAL OUTPUT
NO
11Press X/x to select the type of jack (if any) you are using to connect to an audio component, then press ENTER.
If you did not connect an audio component, select “NO,” then go to step 15.
If you connected an audio component using coaxial digital cable, select “YES:
DIGITAL OUTPUT.”
12Press X/x to select the type of
Dolby Digital signal you wish to send to your audio component.
If your audio component has a Dolby Digital decoder, select “DOLBY DIGITAL.” Otherwise, select
| AUDIO SETUP |
|
| |
|
| AUDIO DRC: |
| STANDARD |
|
| DOWNMIX: | DOLBY SURROUND | |
|
| DIGITAL OUT: |
| ON |
|
| DOLBY DIGITAL: |
| DOLBY DIGITAL |
|
| MPEG: |
| DOLBY DIGITAL |
|
| DTS: |
| |
|
| 48kHz/96kHz PCM: | 48kHz/16bit | |
|
|
|
|
|
13Press ENTER.
“DTS” is selected. |
|
|
| |||
|
|
|
|
|
|
|
|
| AUDIO SETUP |
|
|
| |
|
|
| AUDIO DRC: |
| STANDARD | |
|
|
| DOWNMIX: | DOLBY SURROUND | ||
|
|
| DIGITAL OUT: |
|
| ON |
|
|
| DOLBY DIGITAL: |
| DOLBY DIGITAL | |
|
|
| MPEG: |
|
| PCM |
|
|
| DTS: |
|
| OFF |
|
|
| 48kHz/96kHz PCM: |
| OFF | |
|
|
| ||||
|
|
|
|
|
| ON |
|
|
|
|
|
|
|
14Press X/x to select whether or not you wish to send a DTS signal to your audio component.
If your audio component has a DTS decoder, select “ON.” Otherwise, select “OFF.”
15Press ENTER.
Quick Setup is finished and connections are complete.
If your audio component has an MPEG audio decoder, set “MPEG” to “MPEG” (page 32).
14