To connect to your audio component
Use the following pattern.
CD/DVD player
DIGITAL OUT | LINE |
COAXIAL | (RGB) |
|
to DIGITAL OUT (COAXIAL)
DIGITAL OUT
COAXIAL
Coaxial digital cable (not supplied)
to coaxial digital input
Audio component with a decoder
: Signal flow
z
For correct speaker location, see the operating instructions supplied with the connected components.
If your audio component has a Dolby*1 Digital, DTS*2, or MPEG audio decoder and a digital input jack, use this connection. You can enjoy Dolby Digital (5.1ch), DTS (5.1ch), and MPEG audio (5.1ch) surround effect.
*1 Manufactured under license from Dolby Laboratories.
Dolby, Pro Logic, and the
*2 Manufactured under license under U.S. Patent #:
5,451,942 & other U.S. and worldwide patents issued & pending. DTS and DTS Digital Out are registered trademarks and the DTS logos and Symbol are trademarks of DTS, Inc. © 1996- 2007 DTS, Inc. All Rights Reserved.
b
•After you have completed the connection, make the appropriate settings in Quick Setup (page 13). If your audio component has an MPEG audio decoder function, set “MPEG” to “MPEG” in “AUDIO SETUP” (page 32). Otherwise, no sound or a loud noise will come from your speakers.
•The TVS effects of this player cannot be used with this connection.
•In order to listen to DTS sound tracks, you must use this connection. DTS sound tracks are not output through the LINE
10