Changing the USB connection setting (USB)

Depending on the computer you are using, if the power supply is insufficient, incomplete data transfer may occur from the computer to your Network Walkman. Setting the USB connection to “Low-100mA” may improve data transfer.

/MENU

 

button

5 Direction JOG

1 Press and hold the /MENU button in stop mode until the following menu screen appears.

Search

2 Press U u of the 5 Direction JOG to select “Advanced Menu” and press i (VOL) to confirm.

3 Press U u of the 5 Direction JOG to select “USB:” and press

i (VOL) to confirm.

The USB connection setting (High- 500mA/Low-100mA) appears in [ ].

USB[High-500mA]

4 Press U u of the 5 Direction JOG to select the desired setting and press i (VOL) to confirm.

5 Press and hold the /MENU button until the screen changes.

To cancel operating the menu screen

Press and hold the /MENU button until the screen changes.

zTips

•When you connect the Network Walkman to a notebook computer, connect the notebook computer to a power supply.

•The charging time will be longer if the USB connection setting is set to “Low-100mA”.

40