15 GB
GB
Parts Description
qj DVI
(DVI-D 24-pin)
DVI IN: Connects to the digital signal output terminal of the video equipment or PC.
Supports HDCP copy protection.
Connects to the digital DVI input of a piece of video equipment or PC. Signa ls input from
the DVI IN connector above will be output.
DVI OUT: Connects to the digital DVI input of a piece of video e quipment or PC. Signals
input from the DVI IN connector above will be output.
AUDIO IN: Inputs an audio signal. Connects to the audio signal output of a piece of
video equipment, etc.
When the display is in standby mode or switched off, no signal is output from DVI OUT.
qk REMOTE (STRAIGHT)
(D-sub 9-pin)
This connector enables remote control of the display using the RS-23 2C protocol. For
details, contact your authorized Sony dealer.
When using this connector, select “RS-232C” in “Network Port”. (page34)
ql REMOTE ( )
(10BASE-T/100BASE-TX)
Serves to connect the display to a network, using a 10BASE-T/100BASE-TX LAN cable.
You can assign various settings and control the display via the network from a PC.
For safety, do not connect the connector for peripheral device wiring that might have
excessive voltage to this port. Follow the instructions for this port.
When using this connector, select “LAN” in “Network Port”. (page34)
Note
Note
Caution
Note