22 GB
Before you start
• First make sure that the power of each piece of equipme nt
is turned off.
• Use cables suitable for the equipm ent to be connected.
• Connect the cables, fully inserting them into the
connectors or jacks. A loose connection may cause hum
and other noise.
• To disconnect the cable, pull it out by grasping the plug.
Never pull the cable itself.
• See the instruction manual of the equipment to be
connected, too.
• Insert the plug securely into the AC IN socket.
• Use one of the two AC plug holders (supplied) to securely
hold the AC plug.
Connecting the Speakers
Connect the speakers SS-SPG02 (not supplied).
Please be sure to connect the speakers correctly. For
more details on connecting the speakers, see the
operating manual of the speakers. For details on how
to route the speaker cords, see page 23.
Connecting the AC Power Cord
1Plug the AC power cord into the AC IN
socket. Then, attach the AC plug holder
(supplied) to the AC power cord.
2Slide the AC plug holder over the cord until
it connects to the AC IN socket cover.
To remove the AC power cord
Release the clips of the AC plug holder from the lock
of the AC IN socket cover, then hold the plug and pull
out the AC power cord.

Connections

AC IN
socket
AC power
cord
AC plug holder
Lock
Clip
AC IN socket cover