Windows Error Codes

Windows® 98

Error 619:

An ISDN mode (V110 or V120) has been selected when creating

The port is

a connection, but is not supported by the network.

disconnected

Select Analogue mode when creating the connection in the

during dial-up

Connection Wizard.

 

 

Error 629:

Telephony settings are set to pulse dialling, change to tone dialling.

The port was

Check the dialling settings for the current location (In Control

disconnected

by the remote

Panel

Phone and Modem Options Dialing Rules

machine during

Location

Edit) and change the Dial using setting to tone,

dial-up

or (if Pulse is a necessity), create a new location called GC79

 

Anywhere and set the dialling to Tone. GC79 anywhere location

 

should then be used whenever you use the GC79.

 

 

Error 630:

A Dial-up networking connection is already connected. Close the

The port was

connected dial-up and try again.

disconnected

 

 

due to hardware

 

 

failure during

 

 

dial-up

 

 

 

 

Error 645:

Incorrect APN or CID selected for network.

Internal

Modify your Dial-up Connection, see Create a GPRS, HSCSD or

authentication

CSD Connection on page 21 for more details. Make sure that the

error during

APN file contains the name of the access point your network

dial-up

operator is using. See the support section on

 

www.SonyEricsson.com site for a full list of network

 

operator APNs.

 

 

Error 650: The

Incorrect User ID and/or password. Re enter correctly.

Remote Access

 

 

server is not

 

 

responding

 

 

during dial-up

 

 

 

 

Error 678:

Either: Service is not supported by SIM (usually for CSD/HSCSD)

Computer you

or the computer is not answering.

are dialling is

 

 

not responding

1 Check SIM settings with your service provider if necessary,

during dial-up

2 Make sure that the server you are dialling is OK,

 

 

3 Make sure that Analogue mode has not been selected with

 

57.6kbps data rate (V110 or V120 mode must be selected

 

and supported by the network).

 

 

Error 720:

The service is not supported by the SIM, usually appears when

No PPP control

you are trying to connect to GPRS Internet. Contact service

protocols

provider to enable GPRS Internet access on SIM card.

configured

 

 

during dial-up

 

 

 

 

 

56Troubleshooting