Windows® 2000

 

Error 619:

An ISDN mode (V110 or V120) has been selected when creating

 

 

The port is

a connection, but is not supported by the network.

 

 

disconnected

Select Analogue mode when creating the connection in the

 

 

during dial-up

Connection Wizard.

 

 

 

 

 

 

 

Error 678:

Either: Service is not supported by SIM (usually for CSD/HSCSD)

 

 

Computer you

or the computer is not answering.

 

 

are dialling is

 

 

 

 

not responding

1 Check SIM settings with your service provider if necessary.

 

 

during dial-up

2 Make sure that the server you are dialling is OK.

 

 

 

 

 

 

3 Make sure that Analogue mode has not been selected with

 

 

 

57.6 kbps data rate (V110 or V120 mode must be selected and

 

 

 

supported by the network).

 

 

 

 

 

 

 

Error 691:

The domain name entry is incorrect.

 

 

Access denied,

Correct the domain name entry or delete if not required.

 

 

user name and

 

 

 

 

password

 

 

 

 

incorrect on the

 

 

 

 

domain during

 

 

 

 

dial-up

 

 

 

 

 

 

 

 

 

Error 718: The

This error indicates a PPP conversation started, but it was

 

 

card was unable

terminated because the remote server did not respond within

 

 

to dial during

an appropriate time. This can be caused by poor line quality or

 

 

dial-up

a problem with the server (ISP). This error can occur when your

 

 

 

modem has connected to the ISP and has sent a username and

 

 

 

password, but there is no response from the server.

 

 

 

Wait a few minutes and try again.

 

 

 

 

 

 

All Windows® Operating Systems

 

 

 

 

 

 

Error 734: The PPP link

The APN entry is incorrect, the signal is weak or the

 

control protocol was

connection is lost whilst dialling.

 

terminated during dial-up

See the support section on www.SonyEricsson.com

 

 

 

site for a list of network operator APNs.

 

 

 

 

Error 678: Computer

Either: Service is not supported by SIM (usually for CSD/

 

you are dialing is not

HSCSD) or the computer is not answering.

 

responding during dial-up

Check SIM settings with your service provider if necessary.

 

 

 

Make sure that the server you are dialing is OK.

 

 

 

If you are unsure which speed to choose from the Speed

 

 

 

tab, start with Analogue 9600, and check to see if it works.

 

 

 

Once your connection works on Analog, you can try the

 

 

 

V110/V120 settings to see if faster speeds are available.

 

 

 

V110/V120 also connects faster than analog. When

 

 

 

roaming you may need to repeat this procedure to adapt

 

 

 

your settings to the capability of the local network operator.

 

 

 

 

 

Troubleshooting57