Setup

Before using your monitor, check that the following accessories are included in your carton:

•Power cord (1)

•HD15 video signal cable (1)

•USB cable (1)

•Macintosh adapter (1)

•Windows Monitor Information Disk (1)

•Warranty card (1)

•Notes on cleaning the screen’s surface (1)

•This instruction manual (1)

Step 1:Connect your monitor to your computer

Turn off the monitor and computer before connecting.

xConnecting to an IBM PC/AT or compatible computer

R G B HD VD

(HD15)

(BNC)

to HD15

to video output

HD15 video signal

cable (supplied) IBM PC/AT or compatible

computer

If your PC system is not compatible with Plug & Play (DDC2AB or DDC2B+)

This monitor uses the No.9 pin in the video signal connector for Plug & Play (DDC2AB or DDC2B+) compatibility. See page 5 for the location of the No.9 pin.

•If your computer accepts the No.9 pin, use the supplied HD15 video signal cable.

•If your computer does not accept the No.9 pin, please consult your dealer for advice on obtaining an HD15 adapter.

xConnecting to a Macintosh or compatible computer

Use the supplied Macintosh adapter.

R G B HD VD

(HD15)

(BNC)

to HD15

Macintosh adapter (supplied)*

 

 

HD15 video signal

Macintosh or

to video

cable (supplied)

compatible computer

output

 

*Connect the supplied Macintosh adapter to the computer before connecting the cable. This adapter is compatible with Macintosh LC, Performa, Quadra, Power Macintosh and Power Macintosh G3 series computers. Macintosh II series and some older versions of PowerBook models may need an adapter with micro switches (not supplied).

xConnecting to the five BNC connectors

R G B HD VD

(HD15)

(BNC)

to VIDEO IN R/G/B

 

 

to SYNC IN

Refer to the preceding

HD/VD

 

examples to connect to your

video signal cable

computer.

 

(SMF-400, not supplied)*

*Connect the cables from left to right in the following order: Red-Green- Blue-HD-VD.

Notes

•Do not touch the pins of the video cable connector as this might bend the pins.

•Plug & Play (DDC) does not apply to the five BNC connectors. If you want to use Plug & Play, connect your computer to the HD15 connector using the supplied video signal cable.

6