Selecting the input signal

You can connect two computers to this monitor using the HD15 and BNC connectors. To switch between the two computers, use the INPUT button.

Press the INPUT button.

The input signal and corresponding input indicator change each time you press this button.

INPUT HD15 BNC

Notes

•If no signal is input to the selected connector, the monitor automatically switches to the other connector.

•If you restart the computer you want to view, or that computer is in power saving mode, the monitor may automatically switch to the other connector’s signal. If this happens, manually select the desired signal using the INPUT button.

Automatically sizing and centering the picture

You can easily adjust the picture to fill the screen by pressing the ASC (auto sizing and centering) button.

Press the ASC button.

The picture automatically fills the screen.

ASC

Notes

• This function is intended for use with a computer running Windows or similar graphic user interface software that provides a full-screen picture. It may not work properly if the background color is dark or if the input picture does not fill the screen to the edges (such as an MS- DOS prompt).

• Pictures with an aspect ratio of 5:4 (resolution: 1280 × 1024, 1800 × 1440*) are displayed at their actual resolution and do not fill the screen to the edges.

• The screen may go blank for a few seconds when the ASC button is

pressed. This is not a malfunction.

* GDM-F500 only

EN

9