Sony GPS-CS1KASP Attach the GPS unit to the handle of a bicycle or a motorcycle using the holder

Using the supplied holder and bracket, you can attach the GPS unit to the handle of a bicycle or a motorcycle.

•The diameter of the handle supported by the bracket is 20 mm to 35 mm.

•Attach the bracket to the part where the GPS unit will not interfere with the operation of the bicycle or motorcycle.

•The compatibility of the bracket cannot be guaranteed for all bicycles or motorcycles.

1 Attach the bracket to the handle of the bicycle etc., following the procedure below.

1Remove the screw cap of the bracket, then wind the belt around the handle.

2Adjust the belt and leave approx. 3 mm of space for the part [A] as illustrated below.

3Tighten the screw of the bracket firmly to fix it to the handle.

Pull both sides of the belt to loosen the belt.

3 mm

Screw cap

2 Insert the GPS unit into the carrying case.