Apply position information to the images using “GPS Image Tracker”

Connect the unit to the computer, launch the supplied software, “GPS Image Tracker”, and import GPS log files to the computer. You can then apply the position information to the imported images.

•Before operating “GPS Image Tracker”, import the recorded images to the computer using the supplied software “Picture Motion Browser”. For details on the procedure to import images from the camera to the computer, refer to the instruction manual supplied with the camera.

•Select [Help] t [About Picture Motion Browser] t [Supported

Formats] from the menu bar of “Picture Motion Browser” to check the

GB

available types of the movie files.

 

•For details on “GPS Image Tracker”, refer to its help files ().

•When connecting the unit to the computer, it does not need a battery as the power is supplied from the computer.

1 Launch “GPS Image Tracker”.

Double-click [] (GPS Image Tracker) on the desktop.

Or, from the Start menu: Click [Start] t [All Programs] (for Windows 2000, [Programs]) t [Sony Picture Utility] t [GPS Image Tracker].

2 Connect the unit to the computer.

Pull out the jack cover as illustrated in the following and connect the unit with the GPS log files to the computer using the supplied USB cable.

GB

Using the software 35