Locating a scene on the tape (Continued)
3 Press REW m 1.

The tape stops automatically when the tape counter reaches “0:00:00”.

The tape counter returns to the time

code display, and disappears.

4 Press PLAY 6.

Playback starts from the point designated “0:00:00” on the tape counter.

bNotes

•There may be a discrepancy of several seconds between the time code and the tape counter.

•The zero set memory function will not work correctly when there is a blank section between recorded sections on the tape.

bNotes

•Once you eject the tape, the end search will not function.

•The end search function does not function correctly, if a blank section between recorded sections on the tape is detected.

zTips

•When setting [END SEARCH] to ASSIGN buttons (p. 35), you can use the end search function on the VCR without using the Remote Commander.

Searching for a scene by date of recording (Date search)

You can locate the point where the recording date changes.

1 Press SEARCH SELECT 2

•During setting the zero set memory function, it is automatically canceled when you perform the following operations:

–Pressing MEMORY PHOTO

–Performing the end search

–Performing the index search

zTips

•When setting [ZEROMEMORY] to ASSIGN buttons (p. 35), you can use the zero set memory function on the VCR without using the Remote Commander.

repeatedly to select [DATE SEARCH].2 Press . (previous)/> (next)5to select a recording date.

You can select the previous or the next date of the present point on the tape.

Playback starts automatically from the point where the date changes.

To cancel the operation

Press ZERO SET MEMORY 4again before rewinding.

Searching for the last scene of the most recent recording (End search)Press END SEARCH 8.

The last scene of the most recent recording is played back for about 5 seconds.

bNotes

•The date search functions only with the tape recorded with date data.

•You need to record more than 2 minutes after the date is changed. The VCR may not accurately detect the point where the recording date changes.

•The date search function will not function correctly, if a blank section between recorded sections on the tape is detected.

32