zTips

When setting [SEARCH SEL], [SEARCH

.] and [SEARCH >] to ASSIGN buttons (p. 35), you can use the date search function on the VCR without using the Remote Commander.

To cancel the operation

Press STOP 7.

Searching for the point where the index signal is recorded (Index search)

You can locate the point where the index signal (p. 37) is recorded by the VCR or other devices.

1 Press SEARCH SELECT 2 repeatedly to select [INDEX SEARCH].

2 Press . (previous)/> (next)

5to select an index point.

You can select the previous or the next index signal of the present point on the tape.

Playback starts automatically from the point where the selected index signal is recorded.

bNotes

If an index recording is less than 2 minutes, the VCR may not accurately detect the index point.

The index search function will not function correctly, if a blank section between recorded sections on the tape is detected.

zTips

When setting [SEARCH SEL], [SEARCH

.] and [SEARCH >] to ASSIGN buttons (p. 35), you can use the date search function on the VCR without using the Remote Commander.

To cancel the operation

Press STOP 7.

Operations Basic

33